{"product_id":"kingfisher-weatherflex-stabilising-solution","title":"Kingfisher Weatherflex Stabilising Solution","description":"\u003ch3\u003ePrimer \u0026amp; Sealer for Porous or Weathered Masonry\u003c\/h3\u003e\n\u003cp\u003eKingfisher Weatherflex Stabilising Solution is a solvent-free, fine-particle, pure acrylic ester copolymer primer, sealer, and stabiliser for masonry surfaces. It is specifically formulated to harden friable or chalking substrates, ensuring a stable base for subsequent coatings. This solution enhances adhesion, improves the depth of colour finish, and often reduces the amount of paint required. \u003c\/p\u003e\n\u003ch4\u003eKey Features \u0026amp; Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStabilises \u0026amp; Hardens:\u003c\/strong\u003e Effectively binds and primes chalking or dusty surfaces, preparing them for painting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves Adhesion:\u003c\/strong\u003e Enhances the bond between the substrate and masonry paint, promoting a longer-lasting finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces Paint Consumption:\u003c\/strong\u003e By sealing porous surfaces, it often decreases the amount of paint needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Drying:\u003c\/strong\u003e Dries within 4–8 hours under normal conditions, allowing for timely application of topcoats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Application:\u003c\/strong\u003e Ready to use with brush, roller, or low-pressure sprayer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-Free:\u003c\/strong\u003e Eco-friendly formulation with low VOC content.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIdeal For\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStabilising friable or \"soft\" masonry due to weathering.\u003c\/li\u003e\n\u003cli\u003ePriming chalking surfaces prone to dusting.\u003c\/li\u003e\n\u003cli\u003ePreparing newly cement-rendered surfaces for painting.\u003c\/li\u003e\n\u003cli\u003eReducing absorbency of porous exterior surfaces like brick, stone, and concrete.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Details\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Clear upon drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e 5 litres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e Allow surfaces to cure for a minimum of 24 hours before applying masonry paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 4–6 m² per litre, depending on surface porosity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Do not apply if air or surface temperature is below 8 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf Life:\u003c\/strong\u003e 12 months in unopened, sealed containers stored in a cool, dry area away from frost and direct sunlight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplication Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e Ensure surfaces are clean, dry, and free from loose or friable materials. Remove any biological growth with Kingfisher Bio-Wash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply the solution evenly using a brush, roller, or low-pressure sprayer. One coat is typically sufficient, but very porous surfaces may require an additional application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying Time:\u003c\/strong\u003e Allow 4–8 hours for each coat to fully dry, depending on ambient temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat Application:\u003c\/strong\u003e For best results, allow surfaces to cure for a minimum of 24 hours before applying Kingfisher Weatherflex Smooth Masonry Paint.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eSafety \u0026amp; Storage\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Measures:\u003c\/strong\u003e Wear gloves and overalls during application. If applying by spray, wear a face mask.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirst Aid:\u003c\/strong\u003e Avoid contact with skin and eyes. If contact occurs, wash immediately with plenty of water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation:\u003c\/strong\u003e Ensure good ventilation during application and drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Store in a cool, dry area away from frost and direct sunlight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisposal:\u003c\/strong\u003e Dispose of contents\/container in accordance with local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor further Health and Safety information on this product, please refer to the Kingfisher Safety Data Sheet, available from the Kingfisher Technical Department.\u003c\/p\u003e","brand":"DIY Refurb","offers":[{"title":"Default Title","offer_id":57062315720969,"sku":"72WSS","price":21.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/4040\/2697\/files\/Kingfisher_Weatherflex-Stabilising-Solution.jpg?v=1778858360","url":"https:\/\/instock.net\/products\/kingfisher-weatherflex-stabilising-solution","provider":"InStock","version":"1.0","type":"link"}