FPS Softair AEG Spring M95

The FPS Softair M95 is a 95 m/s AEG spring for players after a moderate, dependable power level from a standard gearbox. It gives more punch than the M90 without the heavier pull of the M100 or M105.

Behind it is careful spring-making: FPS winds it from burnished, pre-hardened carbon steel wire with added silicon and chromium (EN10270/2), then stabilises it in an oven at 400°C for 30 minutes straight after forming to help it last. The coils use a variable pitch, and both ends are ground for smooth, even compression.

Key specs

• Rating: 95 m/s (M95)
• Length: 170mm
• Outside diameter: 14.30mm
• Material: EN10270/2 silicon-chromium carbon steel wire, burnished and pre-hardened
• Oven-stabilised at 400°C for 30 minutes
• Variable-pitch coils with ground ends
• Calibrated on a 363mm inner barrel with a type D cylinder (barrels 301–400mm)
• Made in Italy
• SKU: FPS-95+

FPS recommends pairing this spring with a ball bearing spring guide and a ball bearing piston head. Each bearing adds roughly 2.5 m/s, according to FPS, so chronograph your AEG after fitting.

You may also like

• FPS Xring carbon fibre reinforced piston head (standard AEG)
• FPS V2 ball bearing spring guide
• FPS Softair AEG shim set (0.20mm x 20)
• All FPS Softair parts