MoYu AoFu WRM

The AoFu WR M is the fourth 7x7 cube design from MoYu, it is an improvement on the AoFu GTS.

The cube has an advanced two-layer design with stabilizing coats, first used by MoYu in the BoChuang GT.
inner edges have small two-layer bases on a long thick leg. The side walls are smooth with tightly rounded edges.
The middle edges have a medium wide two-layer base with a wide and short torpedo. The side protrusions are wide and quite thin.
The outer edges have a large anti-pop base and wide stabilization protrusions in mid-height, which together with analogue protrusions on all outdoor centers form stabilization coats.
There are no grooves to reduce friction surfaces.
The cube has 4x1.5 mm N35 magnets on the inner layers and 4x1 mm N35 on the corners fixed in slots.
Due to its small size (64.5 mm) and optimized plastic thickness, the cube is the lightest 7x7 speedcube.

The cube is extremely light and smooth directly from the box. Magnets have medium strength and a short and palpable click. The springs used are very soft. Mechanical stability and bends are at a very high level.
The small size combined with a very low weight and medium magnets makes the cube very controllable and fast, so it does not require accelerating lubricants. The ideal solution in this case is Peres Light.
AoFu WR M is the best 7x7 cube available on the market.

Recommended for intermediate and advanced speedcubers.