Woodzone Insecticide - Eradication and Prevention of Wood-Boring Insects

Ready-to-Use Treatment for the Eradication and Prevention of Wood-Boring Insects

Woodzone Insecticide is a high-performance, ready-to-use wood treatment formulated to eliminate infestations of wood-boring insects such as woodworm, furniture beetle, and other common timber pests. Designed for professional and DIY use, it penetrates deeply into timber to provide long-lasting protection and prevents future infestations. Ideal for use on roof timbers, floorboards, joists, and wooden structures in both domestic and commercial properties.

Key Features & Benefits

• Effective Insect Control: Kills active wood-boring insects including woodworm and prevents reinfestation.
• Deep Penetration: Soaks into timber to ensure lasting protection of the entire treated area.
• Ready to Use: Supplied in a convenient liquid form — no mixing or dilution required.
• Low Odour Formula: User-friendly and suitable for indoor use with minimal disruption.
• Suitable for Most Timbers: Can be applied to softwoods and hardwoods in structural and decorative use.

Product Details

• Formulation: Water-based insecticidal wood preservative
• Application: Brush, roller, or low-pressure spray
• Coverage: Approx. 5–8 m² per litre depending on timber porosity
• Drying Time: Touch dry in 1–2 hours, fully dry in 24 hours
• Use Areas: Roof spaces, floor voids, structural timbers, and joinery

Application Instructions

1. Preparation: Ensure timber is clean, dry, and free from coatings or surface contaminants.
2. Apply Evenly: Use a brush or spray to apply generously, allowing the product to soak into the surface.
3. Second Coat (if required): Apply a second coat after the first has absorbed fully for increased protection.
4. Allow to Dry: Ensure treated areas are fully dry before redecoration or reinstatement.

Limitations

• Do not apply to damp timber or use in conditions below 5°C.
• Not suitable for use on timber in direct contact with food or animal housing.

Health & Safety

Use in well-ventilated areas and avoid skin and eye contact. Wear appropriate PPE including gloves and safety glasses. Refer to the Safety Data Sheet (SDS) for full safety information before use.